9
Yes
None
1
1000000
Name...
/grip/
0 items in cart
or empty cart
Thumbnail
Sort By:

Categories:

Sub-Categories:

Grip
Stanton - Jimmy Jib Lite
CInquire
yDetails
Stanton - Jimmy Jib Lite Image

The Jimmy Jib light is for medium sized cameras (up to 6.8Kg) and can be built into 3 lengths 1.8m, 3.6m, and 5.4m. Ideal for the new generation of small lightweight cameras such as the Sony F5, F55, Canon C300, C500, DSLR cameras, etc

Features:

  • Sets up quickly
  • 3 Jibs in one (1.8m (6ft),3.6m (12ft) and 5.4m (18ft)
  • Weights only 25Kg (55lbs)
  • AC or DC operation
  • Breaks down to 1m (3.4ft)
  • 6.8Kg (15lb) camera capacity
Ronford Baker - Low Angle Car Grip Kit
CInquire
yDetails
Ronford Baker - Low Angle Car Grip Kit Image

Head castings

150cm or 100mm bowl. Other fittings can be supplied on request.

Stirrup Casings

Pivot from head and terminate in very efficient nylon cam clamps operated by large diameter handwheels, make the changeover from one set of legs to another a matter of seconds. The combination of legs covers any height from floor to 2’ 11” (88.9cm).

Technical Specifications

Materials

Manufactured from LM25 alloy castings and high tensile alloy tube.

Finish

Castings are anodised and stove enameled black texture. Tubes are polished and satin anodised. Steel parts are chromium plated. Tie down points are provided on head and bottom of telescopic legs.

Height

Low angle 7 ½” (19.5cm). Stub legs 13 ½” (34.29cm).

Telescopic legs max. 2’ 11” (88.9cm), min 2’ (60.98cm).

Net Weight

Head and stirrups only 5lb 2oz (2.32kg)

Steel Feet 14oz (0.39kg)

Stub legs 12oz (0.34kg)

Telescopic legs 3lb 4oz (1.47kg)

Limpets 6lb 10oz (3kg)

Total weight 10lb (4.5kg)

Transit Cases Specification

Rigidised aluminum.

Dimensions 21¼” x 13¼” x 10¼” (54cm x 37cm x 26cm) standard. 26” x 12” x 11” (65cm x 30cm x 27.5cm) baby.

Weight 14lb (6kg).

Microdolly Hollywood - Camera Mount System
CInquire
yDetails
Microdolly Hollywood - Camera Mount System Image

This CAMERA SUCTION MOUNT is ideal to safely attach a camera on a moving vehicle, aircraft, train or boat. This innovative KIT uses three strong suction cups, six universal joint clamps and a set of three 12 inch and three 18 inch rods that connect in seconds to a camera plate to position a camera or light almost anyplace. A lighting spud and stainless steel safety cable are also included.

The MOUNT weighs just six pounds. (3.5.kg) Total holding force is 200 pounds. (90kg) Maximum camera weight is 50 pounds. (22.5 kg)

The KIT comes in a sturdy metal reinforced travel case that doubles as a camera platform for low angle shots. Inside the case is a large metal base plate the lets you use the MOUNT as a Mini Tripod or Hi-Hat. You can then reverse the rods upward and use the clamps to attach other devices such as a French Flag, Monitor or Eye Light.

With the included foam pads and grips, this multi-purpose KIT can also be configured to serve as a comfortable shoulder mount.

Strong and lightweight, this unique SUCTION MOUNT KIT by MICRODOLLY is a valuable and versatile production tool.

POLECAM with 3 Axes Stabilsed Rig
CInquire
yDetails
POLECAM with 3 Axes Stabilsed Rig Image

Designed for lightweight cameras, the Polecam is the only lightweight camera crane that can achieve precise and effortless moving shots. When on multiple locations a day, hard to reach locations, a slim schedule, and tight places, this is the crane you’re going to need.

Transports easily in the boot of your car, battery-operated, achieves a nice long length (from 1.2m up to 5.4m) but yet very compact and light. The Polecam is English made using strong carbon extensions and a lightweight head to control Pan/Tilt movements.

The Polecam is operated by a single operator and takes no more than 20min to rig. Excellent for DSLR, C300, X70 and other in range cameras.

We have also adapted the POLECAM system to take our Pheonix Camera System, so you can get smooth shots 3 axes of stabilisation that doesn’t limit you to land but also get some great shoot on the water as well.

Grip
CInquire
yDetails
Stanton - Jimmy Jib Lite Image
Stanton - Jimmy Jib Lite
The Jimmy Jib light is for medium sized cameras (up to 6.8Kg) and can be built into 3 lengths 1.8m, 3.6m, and 5.4m. Ideal for the new generation of small lightweight cameras such as the Sony F5, F55, Canon C300, C500, DSLR cameras, etc Features: Sets up quickly 3 Jibs in one (1.8m (6ft),3.6m (12ft) and 5.4m (18ft) Weights only 25Kg (55lbs) AC or DC operation Breaks down to 1m (3.4ft) 6.8Kg (15lb) camera capacity
CInquire
yDetails
Ronford Baker - Low Angle Car Grip Kit Image
Ronford Baker - Low Angle Car Grip Kit
Head castings 150cm or 100mm bowl. Other fittings can be supplied on request. Stirrup Casings Pivot from head and terminate in very efficient nylon cam clamps operated by large diameter handwheels, make the changeover from one set of legs to another a matter of seconds. The combination of legs covers any height from floor to 2’ 11” (88.9cm). Technical Specifications Materials Manufactured from LM25 alloy castings and high tensile alloy tube. Finish Castings are anodised and stove enameled black texture. Tubes are polished and satin anodised. Steel parts are chromium plated. Tie down points are provided on head and bottom of telescopic legs. Height Low angle 7 ½” (19.5cm). Stub legs 13 ½” (34.29cm). Telescopic legs max. 2’ 11” (88.9cm), min 2’ (60.98cm). Net Weight Head and stirrups only 5lb 2oz (2.32kg) Steel Feet 14oz (0.39kg) Stub legs 12oz (0.34kg) Telescopic legs 3lb 4oz (1.47kg) Limpets 6lb 10oz (3kg) Total weight 10lb (4.5kg) Transit Cases Specification Rigidised aluminum. Dimensions 21¼” x 13¼” x 10¼” (54cm x 37cm x 26cm) standard. 26” x 12” x 11” (65cm x 30cm x 27.5cm) baby. Weight 14lb (6kg).
CInquire
yDetails
Microdolly Hollywood - Camera Mount System Image
Microdolly Hollywood - Camera Mount System
This CAMERA SUCTION MOUNT is ideal to safely attach a camera on a moving vehicle, aircraft, train or boat. This innovative KIT uses three strong suction cups, six universal joint clamps and a set of three 12 inch and three 18 inch rods that connect in seconds to a camera plate to position a camera or light almost anyplace. A lighting spud and stainless steel safety cable are also included. The MOUNT weighs just six pounds. (3.5.kg) Total holding force is 200 pounds. (90kg) Maximum camera weight is 50 pounds. (22.5 kg) The KIT comes in a sturdy metal reinforced travel case that doubles as a camera platform for low angle shots. Inside the case is a large metal base plate the lets you use the MOUNT as a Mini Tripod or Hi-Hat. You can then reverse the rods upward and use the clamps to attach other devices such as a French Flag, Monitor or Eye Light. With the included foam pads and grips, this multi-purpose KIT can also be configured to serve as a comfortable shoulder mount. Strong and lightweight, this unique SUCTION MOUNT KIT by MICRODOLLY is a valuable and versatile production tool.
CInquire
yDetails
POLECAM with 3 Axes Stabilsed Rig Image
POLECAM with 3 Axes Stabilsed Rig
Designed for lightweight cameras, the Polecam is the only lightweight camera crane that can achieve precise and effortless moving shots. When on multiple locations a day, hard to reach locations, a slim schedule, and tight places, this is the crane you’re going to need. Transports easily in the boot of your car, battery-operated, achieves a nice long length (from 1.2m up to 5.4m) but yet very compact and light. The Polecam is English made using strong carbon extensions and a lightweight head to control Pan/Tilt movements. The Polecam is operated by a single operator and takes no more than 20min to rig. Excellent for DSLR, C300, X70 and other in range cameras. We have also adapted the POLECAM system to take our Pheonix Camera System, so you can get smooth shots 3 axes of stabilisation that doesn’t limit you to land but also get some great shoot on the water as well.